NCS-30® (Water Well)
NCS-30® (Water Well)Water Well Nonmetallic Thread Compound - NSF H2
Nonconductive thread compound is a premium quality, nonmetallic compound containing carbon-based fibers and additives and other natural extreme pressure and anti-wear additives. These are blended into JET-LUBE’s high temp calcium complex base grease. This new base grease offers the additional advantage of superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. Especially effective for invert or high-pH muds.
NCS-30’s solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. NCS-30, with frictional properties similar to KOPR-KOTE®, has been designed to utilize the makeup charts in API RP7G.
• Designed for optimum performance on all rotary-shouldered connections such as Tool Joints and Drill Collars. It can also be used on premium/proprietary thread designs such as Double-Shouldered, Wedge Thread™*, and other types of mechanical seal designs. It may also be used on certain non-interference tubing thread designs when properly torque compensated.
Note: For a “Yellow”-rated product, use NCS-30® ECF™.
Relative to API RP 7G 1.15 (drill strings)
Relative to API RP 5A3 1.40 (relative to API-Mod)
NSF H2 Registered
Oilfield/Mining/Construction Drilling -20°F (-29°C) to 500°F (260°C)
Industrial Anti-Seize Applications -65°F (-54°C) to 2600°F (1427°C)